ACCELERATOR SA

ACCELERATOR SA is a fast curing catalyst designed for medium to low temperature fixation of thermoplastic resins.

PROPERTIES:

            1.  Complete cross-linkage between fiber and resin at temperatures between 270 and    290°F.

            2.  Good bath stability.

            3.  Improved wash fastness of thermoplastic resin.

SPECIFICATIONS:

Appearance......................................................................... Water white liquid

Chemical Nature............................................ Ammonium salt of a sulfonic acid

% Solids................................................................................................. 13±1

pH.......................................................................................................... 9-9.5

Density................................................................................. 8.7 lbs. per gallon

APPLICATION:

As a general rule, 4.0% ACCELERATOR SA based on the total amount of resin in the bath should be used.  The product should be prediluted with water prior to addition.

Additional information regarding this accelerator is available upon request from the laboratories of Unichem, Inc.

SHIPPING INFORMATION:

55 gallon fiber or steel non-returnable drums.

WE BELIEVE THAT THE INFORMATION CONTAINED IS CURRENT AS OF JUNE 19,1997.  THIS INFORMATION IS NOT TO BE TAKEN AS A WARRANTY OR REPRESENTATION FOR WHICH WE ASSUME LEGAL RESPONSIBILITY OR APPROVAL.