UNIBOND SB 300

UNIBOND SB 300 is a very soft carboxylated styrene-butadiene latex emulsion specifically designed for formulation of permanent label adhesives.  Its relative high molecular weight and styrene content allows the formulation of permanent label adhesives that are high in peel and tack, yet require a minimum amount of tackifier.  It was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.

TYPICAL PROPERTIES:

Total Solids............................................................................................. 50 %

pH............................................................................................................. 8.8

Bound Styrene........................................................................................ 35 %

Viscosity (2@20)............................................................................... 300 cps.

Particle Charge.................................................................................... Anionic

Tg (°C)...................................................................................................... -44

Density (lbs./gal.)........................................................................................ 8.4

Specific Gravity........................................................................................ 1.15

APPLICATIONS:

UNIBOND SB 300 is recommended for pressure sensitive permanent label adhesives and blended with natural latex for high shear tape adhesives.

WE BELIEVE THAT THE INFORMATION CONTAINED IS CURRENT AS OF NOVEMBER 1, 2001.  THIS INFORMATION IS NOT TO BE TAKEN AS A WARRANTY OR REPRESENTATION FOR WHICH WE ASSUME LEGAL RESPONSIBILITY OR APPROVAL.