Marine
The Sea Tests Everything. We Formulate for Every Failure Mode.
Unichem manufactures marine-grade adhesives, sealants, and protective coatings, including the Dur-O-Bond line, engineered to bond, seal, and protect hulls, decks, and submersible equipment against salt water, immersion, UV, and constant flex.
From the Hull-to-Deck Joint to Below the Waterline, the Chemistry Has to Hold.
Joints crack at the first hard sea. Putty slumps off the vertical before it gels. Resin blushes below the waterline. Salt fog kills the electronics. A spark finds the engine room.
Unichem formulates and manufactures the structural bonders, core adhesives, vinyl ester compounds, protective coatings, fire-retardant systems, and encapsulants that make composite and commercial vessels perform for decades. Matched to the substrate. Gel-timed to your shop. Shipped from an ISO 9001:2015 facility.
Structural bonding and fairing
Glass-reinforced polyester and vinyl ester putties for hull-to-deck joints, stringers, and bulkheads. Thixotropic enough to hold the bead on a vertical seam, tough enough to arrest cracking under slam and flex. Tuned to your shop temperature and part size.
Core and sandwich construction
Low-exotherm, low-shrinkage compounds that bed balsa and PVC foam core to FRP skins with high elongation and minimal print-through. The core stays put. The surface stays true.
Below-the-waterline and immersion
Epoxy vinyl ester bonding, bedding, and fairing rated for permanent immersion, tanks, and chemically aggressive service. Formulated for the conditions where hydrolysis and corrosion are not edge cases, they are the design case.
Corrosion and protective coatings
Multi-coat epoxy, urethane, and zinc-rich systems that protect steel hulls, tanks, and offshore structure. ASTM B117 salt-spray performance from coastal service through commercial operations.
Fire protection and life safety
Fire-retardant vinyl ester grades and intumescent coatings for engine rooms and passenger-vessel structure. Engineered to ASTM E84/UL 723 and IMO FTP. Formulated to support classification-society review where class approval is required.
Marine electronics potting
TOUGH-SEAL hybrid epoxy elastomers that protect nav electronics, sensors, and connectors against moisture, vibration, and thermal cycling from -40C to 150C (-40F to 302F). Formulated to protect the joint without stressing the solder.
Products for Marine
Unichem products formulated for marine substrates, environments, and performance requirements. Each ships with full TDS and SDS documentation.
• TOUGH-SEAL Potting Compounds
• Dur-O-Bond Marine Adhesives
• Flamex Fire Retardants
Applications we serve
Where Unichem chemistry ends up on the vessel and in the field.
• Production boat and yacht building
• Hull-to-deck joints, stringers, and bulkheads
• Cored and sandwich construction, balsa and PVC foam
• Below-the-waterline structure and repair
• Tanks, pipe, and corrosion-resistant linings
• Engine rooms and fire-regulated compartments
• Marine electronics, sensors, and connectors
• Refit, restoration, and field repair
• Commercial, passenger, and offshore vessels
• Industrial FRP and composite fabrication
Manufacturing capabilities
What the plant can actually make, and the standards we work to.
Unichem manufactures marine chemistry from first formulation through full production under ISO 9001:2015. Custom formulation, private-label, and turnkey production are standard.
Chemistry we produce:
Isophthalic polyester, epoxy vinyl ester, fire-retardant vinyl ester, and glass-fiber-reinforced systems matched to substrate and waterline. Thixotropic, glass-reinforced formulations that hold the bead on a vertical or overhead seam. Bench-set gel times using MEKP-9 or BPO-cream initiation tuned to your shop temperature and part size.
Standards we work to:
ASTM D2471, D2196, C297, D638/D790, D570. ASTM E84/UL 723 for fire performance. IMO 2010 FTP. ISO 12215. ABYC/USCG-NMMA.
Classification-society review:
Formulated to support ABS, DNV, Lloyd’s Register, and Bureau Veritas review where class approval is required.
Frequently Asked Questions For Marine Applications
Does Unichem supply marine OEMs or repair contractors?
Unichem supplies both marine OEMs and repair contractors. We manufacture production chemistry for OEMs building new vessels and repair-grade products for contractors doing field and drydock work. The formulations differ because production environments allow more control over cure conditions, substrate preparation, and application method than field repair does — so we formulate to match either context.
Can Unichem develop a custom formula for a specific marine application?
Yes. Our formulation team works from your substrate, environmental condition, and performance requirement, not from a catalog. If you need a structural adhesive for a specific laminate system, a potting compound matched to a particular temperature swing, or a coating formulated for a chemically aggressive service environment, bring us the spec.We engage at the chemistry level from the first conversation.
What certifications do Unichem marine products carry?
Unichem operates under ISO 9001:2015 with full batch traceability on every production run. Standards fluency covers ASTM D2471, D2196, C297, D638/D790, D570, E84/UL 723, IMO 2010 FTP, ISO 12215, and ABYC/USCG-NMMA. Formulated to support classification-society review ( ABS, DNV, Lloyd’s Register, and Bureau Veritas ) where class approval is required. Contact us with your specific compliance requirement and we will confirm the right product and documentation package.
Your Vessel Has to Perform. So Does the Chemistry Inside It.
Whether you need a proven product for a production run or a partner to develop something new for a specific application, our team engages at the chemistry level from day one.