Technology & Innovation

TOUGH-SEAL Potting Compounds

Hybrid epoxy chemistry engineered for endless electronics applications where mechanical, electrical, and environmental protection and bond integrity are not optional.

TOUGH-SEAL Performance

Icon Energy Battery

Cure chemistry

Two-component hybrid epoxy elastomer, epoxy, and urethane chemistries.

Thermometer icon

Temperature range

Thermal cycling from -40C to 150C (-40F to 302F).

Icon Water Repellent

Moisture resistance

2,000+ hours at 85 degrees C / 85% RH without delamination.

Icon Nozzle

Dispensing

50 and 400 mL cartridges, plus 1, 5, and 55 gallon containers for bulk meter-mix systems.

Why TOUGH-SEAL

Tough-Seal logo

A formulation for every assembly. TOUGH-SEAL hybrid epoxy elastomer, epoxy, and urethane potting compounds are two-component formulations that vary in gel time, viscosity, and hardness. Self-leveling low- and medium-viscosity grades flow around circuit board components and connectors for complete coverage. A glob-top grade handles localized potting and damming, and a UL 94 V-0 listed grade covers flame-retardant requirements.

Protection built in. Every TOUGH-SEAL formulation is moisture resistant and anti-fungal, and holds up through thermal cycling from -40C to 150C (-40F to 302F), thermal shock, vibration, and chemical and UV exposure. Tough-Seal is RoHS and REACH compliant.

Dispensed your way. 50 and 400 mL cartridges for manual and pneumatic handheld dispensers, and 1, 5, and 55 gallon containers for bulk meter-mix systems. Our engineers can help you find the right equipment for your process.

Made for electronics. TOUGH-SEAL is built for potting electronics assemblies. For structural bonding, see Unibond. For marine bonding, see Dur-O-Bond.

Where TOUGH-SEAL Is Used

Applications: Electronics Potting, Filtration Adhesives, Industrial Adhesives

Industries: Electronics, Industrial Manufacturing, Marine

Technician Installing Processor Onto Computer Motherboard

Application Examples

  • Lighting – safety signal, LED, automotive LED, high bay LED, aviation, marine, and helideck lighting.
  • Sensors – automotive, marine, thermistor, airflow, RF, gas, and electronic sensors.
  • Circuit boards and control systems – printed circuit board assemblies and control systems.
  • Wire harnesses and motors – wire harness assemblies and highly engineered motors.
  • Fire detection – advanced fire detection systems.
  • Flame-retardant applications – UL 94 V-0 applications.
Technician Soldering Electronic Components On Green Circuit Board

Built for the Conditions That Expose Every Weakness

A potting compound is not judged in the lab. It is judged the first time an assembly hits thermal cycling, vibration, or a moisture event it was not built to survive.

TOUGH-SEAL potting compounds protect circuit boards, sensors, connectors, and EV modules against heat, moisture, vibration, and chemical attack. Available in a range of gel times, viscosities, and hardnesses to fit your assembly and production line.

Why TOUGH-SEAL Is the Right Compound for Your Application

TOUGH-SEAL

How It Works

Epoxy backbone with an elastomeric network; cures to a tough, flexible solid without isocyanates. Bonds like an epoxy, moves like a urethane, protects like a silicone.

Best for

Assemblies that see thermal cycling, vibration, and moisture at once, where rigid epoxy would crack and silicone would lose adhesion.

Trade-off

Higher material cost than commodity epoxy; two-part mix-and-meter required.

Rigid Epoxy

How It Works

Cross-links to a hard, high-modulus solid with strong adhesion and chemical resistance.

Limitations

Transfers stress into fine leads and solder joints; brittle at low temperature; higher exotherm in large pours.

Urethane

How It Works

Flexible cured elastomer with good low-temperature performance.

Limitations

Moisture-sensitive during cure; isocyanate handling; can soften in humid heat.

Silicone

How It Works

Very wide service-temperature range with a soft, stress-free cured gel or elastomer.

Limitations

Weak adhesion and mechanical strength; poor fuel and solvent resistance; can inhibit cure of nearby materials.

Bof Cta Bg

Have a Spec? We Can Meet It.

Our team works with electronics assemblers, filter manufacturers, and composite builders to select the TOUGH-SEAL formulation that fits their substrate, cure schedule, and environment.

TOUGH-SEAL: Frequently Asked Questions

What substrates does Tough-Seal bond to?

TOUGH-SEAL is formulated for circuit boards, sensors, connectors, and EV battery modules, and adheres to the metals, plastics, and composite housings common to those assemblies. We can confirm which Tough-Seal is right for your substrate and application.