Industrial Manufacturing
Your Line Runs on Chemistry That Has to Be Right Every Time
Unichem is the CASE chemistry partner for industrial manufacturers, coatings, adhesives, sealants, and elastomers matched to the joint, the substrate, and the line, from prototype through repeatable full-scale production.
The Line Does Not Stop for Chemistry That Almost Works.
Industrial manufacturing runs on tight tolerances, repeatable processes, and chemistry that performs as well in year 3 as it did at development and launch. A bond that holds in qualification and fails in production is not a chemistry problem. It is a partnership problem.
Industrial Manufacturing Applications
Structural and assembly adhesives
One- and two-part epoxy and polyurethane structural adhesives for metal, composite, plastic, and mixed-substrate assemblies. High shear strength, gap-filling capability, and cure profiles tuned to your line speed. Formulated to ASTM D1002 and D1876. Custom viscosity and cartridge or bulk dispensing available.
Filtration and element adhesives
End-cap potting compounds, pleat bonding adhesives, and seam sealants for air, liquid, fuel, and hydraulic filter elements. Formulated for chemical resistance to the media being filtered, dimensional stability across the service interval, and leak-proof performance at full differential pressure.
Pressure-sensitive and laminating adhesives
Water-based pressure-sensitive adhesive systems for industrial tapes, laminates, and specialty bonding applications. Peel strength, tack, and shear resistance matched to your substrate and application method. Foam and upholstery lamination, flocking adhesives, and flexible duct bonding available.
Industrial equipment coatings
Epoxy, polyurethane, and acrylic coating systems for industrial equipment, machinery, and manufactured goods. Chemical resistance, abrasion resistance, and corrosion protection matched to the service environment. Gloss level and application method to your specification. Low-VOC formulations available.
Elastomeric sealants and gaskets
High-elongation elastomeric sealants for dynamic joints, flexible connections, and assemblies subject to vibration, thermal cycling, and mechanical movement. Adhesion to metal, plastic, composite, and painted surfaces. Custom durometer and cure profile available.
HVAC and component bonding
Structural bonds, seam sealants, and potting compounds for HVAC assemblies, filter housings, and industrial components. Leak-proof at full operating pressure and temperature. Formulated to withstand temperature extremes and for the chemical environment inside the assembly, not just the exterior service conditions.
Products for Industrial Manufacturing
Unichem products engineered for industrial substrates, production environments, and performance requirements. Full TDS and SDS documentation available for every product.
• TOUGH-SEAL Potting Compounds
• Dur-O-Bond Marine Adhesives
• Unibond Adhesives & Coatings
• Unigard Durable Water Repellent
• Flamex Fire Retardants
• ProBlend Cleaning
Additional applications we serve
• Structural bonding and composite assembly
• Filter element manufacture and end-cap potting
• Pressure-sensitive tapes and industrial laminates
• Foam and upholstery lamination
• HVAC component assembly and sealing
• Industrial equipment coatings and protection
• Flocking adhesives and specialty surface treatments
• Flexible duct and connector bonding
• Gasketing and elastomeric sealing
• Electronic assembly and sensor potting in industrial equipment
Manufacturing capabilities
Unichem manufactures industrial CASE chemistry from first formulation through full production under ISO 9001:2015. Custom formulation, viscosity control, private-label, and turnkey production are standard.
- Chemistry we produce: One- and two-part epoxy, polyurethane, acrylic, and pressure-sensitive adhesive systems. Elastomeric and rigid sealants. Industrial equipment coatings in liquid, paste, and film formats. Apply by spray, roll, extrusion, or manual application. Cure from instant tack through two-component reactive systems.
- Standards we work to: ASTM D1002 and D1876 for adhesive performance. ASTM D3330 and D3654 for pressure-sensitive adhesives. Custom viscosity and cure profile to your specification. Lot-to-lot consistency documented on every production run
Frequently Asked Questions for Industrial Manufacturing
Can Unichem formulate a custom adhesive or sealant for a specific industrial application?
Yes. Our formulation team works from your substrate, operating environment, cure requirement, and application method. We develop the formula at bench scale, validate it in pilot production, and transition directly into commercial volume without switching partners or equipment.
Does Unichem handle private label for industrial product lines?
Unichem handles private label for industrial product lines. We manage custom labeling and private-label programs for industrial specialty chemical products, from boutique runs through high-volume production. Your brand on the label, our chemistry and quality system behind it.
What does lot-to-lot consistency mean in practice?
Every production batch is tested against the same specification used to qualify the product. Certificate of Analysis issued for every batch. Retained samples held for traceability. Nonconformances documented and resolved under our ISO 9001:2015 quality system. If a batch does not meet spec, it does not ship.
What toll manufacturing capabilities does Unichem offer for industrial manufacturers?
Liquid blending from pilot batch to bulk tanker, dry and powder blending including hazardous materials, emulsions and dispersions, grinding and milling to under 100 microns, and reaction chemistry including esterification, neutralization, saponification, and ammoniation. ISO 9001:2015 certified with full batch traceability on every run.
Your Line Needs Chemistry That Performs the Same Way Every Time. We Build It That Way.
Whether you are qualifying an adhesive for a new assembly, sourcing a filtration bonding system, or looking for a manufacturing partner who can scale with your production, our team engages at the chemistry level from the first conversation.