Electronics
The Component Protected Today Is the Product That Performs Tomorrow
Unichem formulates potting compounds, encapsulants, and conformal protection, led by the Tough-Seal hybrid epoxy-elastomer line, that seals circuit boards, sensors, connectors, and EV modules against heat, moisture, vibration, and chemical attack while minimizing embedment stress
Protect Your Electronics Assemblies From Field Failures
Thermal cycling. Vibration. Moisture ingress. Chemical exposure. The potting compound protecting your assembly has to perform in those conditions from the first production run to the last field installation, years later.
TOUGH-SEAL potting compounds are engineered to protect electronics assemblies that are exposed to less than ideal conditions and cannot afford a field failure. By selecting the right working time, cure schedule, and hardness, your assembly will be protected from the unexpected and will survive in tough environments.”
Circuit board and control module potting
TOUGH-SEAL hybrid epoxy elastomer potting for PCB potting and control module encapsulation. Void-free flow. Shore A 37 to 80 available. Low-outgassing grades for space and sealed-environment applications.
Sensor and transducer sealing
Formulated to survive thermal cycling from -40C to 150C and 2000+ hours of rigorous reliability testing at 85C/85%RH (Ultra 60) to prevent cracking, delamination, or electrical failure caused by repeated heating and cooling extremes and without any signs of degradation or change in hardness, making it an excellent choice for endless electronics applications.
EV battery pack and module encapsulation
Thermally conductive and flame-retardant encapsulants for high-voltage battery packs and power electronics. Dielectric isolation, heat draw-down, and UL 94 V-0 on listed grades. Formulated for the thermal and electrical demands of EV battery systems.
Connector and cable assembly sealing
Flexible potting and overmolding compounds for connector bodies, cable terminations, and wire harness sealing. Various durometer and cure profiles are available for your application.
LED and optically clear lens potting
Klear-Seal 82 optically clear, water white, non-yellowing potting for LED arrays, optical sensors, and polycarbonate lens assemblies. Passes NASA E595 outgassing. Non-fogging formulations for lighting applications where clarity is a performance requirement.
Products for Electronics
Unichem potting and encapsulation products for electronics assemblies. Full TDS and SDS documentation, including cure curves and Shore hardness data, available for every product.
• TOUGH-SEAL Potting Compounds
Applications we serve
• Circuit board and PCB potting
• Control module and ECU encapsulation
• Pressure and position sensor sealing
• EV battery packs and power electronics
• Connector bodies and cable terminations
• Wire, coil, and transformer encapsulation
• LED arrays and optically clear lens potting
• Marine and submersible electronics
• Cabin air, HVAC, and fuel filter element potting
Manufacturing capabilities
Unichem produces Tough-Seal potting compounds from formulation through full production, with a certificate of analysis on every batch.
- Chemistry we produce: Two-component hybrid epoxy elastomer, epoxy, and urethane potting compounds in a range of gel times, viscosities, and hardnesses. Self-leveling low- and medium-viscosity grades, a glob-top grade for localized potting and damming, a UL 94 V-0 listed grade, and Klear-Seal 82 for optically clear potting.
- Standards we work to: UL 94 V-0 (listed grade). RoHS and REACH compliant. Klear-Seal 82 passes NASA E595 outgassing. Thermal cycling from -40C to 150C (-40F to 302F).
Frequently Asked Questions About Electronics
What potting compound chemistry does Unichem offer for electronics?
Hybrid epoxy elastomer, epoxy, and urethane chemistries in two-component formulations that vary in gel time, viscosity, and hardness. From self-leveling low- and medium-viscosity formulations for complete coverage around circuit board components or connectors, to a glob-top formulation for localized potting and damming, to a UL 94 V-0 listed formulation, the TOUGH-SEAL line fits a wide range of potting and encapsulating for assemblies subject to thermal cycling, thermal shock, vibration, and moisture, chemical, and UV exposure.
Can TOUGH-SEAL be custom-formulated for a specific application?
TOUGH-SEAL and TOUGH-SEAL ULTRA are an original and next-generation family of potting compounds, available in formulations that vary in gel time, viscosity, and hardness. If our current formulations are not a fit, our formulation team can work with you to develop a product that fits your assembly and production requirements.
What electronic assembly types does TOUGH-SEAL serve?
Circuit board and control module potting, ECUs and pressure transducers, connectors and cable assemblies, LED and optically clear lens potting, EV battery packs and modules, filter elements, marine and submersible electronics, and more. If it needs protection from moisture, vibration, or thermal stress, bring us the spec.
The Assembly Cannot Show the Weakness. Neither Can the Chemistry Inside It.
Whether you are specifying a potting compound for a new sensor assembly, qualifying an encapsulant for an EV battery module, or looking for a custom formulation for a demanding application, our team engages at the chemistry level from the first conversation.